Thursday, September 8, 2011
Inside Ventilation Filter Installation
The Interior ventilation filter to Eulogize RDX, TL, TSX, Honda Accord, Civic, CR-V. Inside ventilation filter is located in the filter housing behind the glove compartment door.
1. open the glove box door. Understand and drag down on glove door holding rod placed on the right side of the glove box door.
2. Insert a flat-tip screw driver for the glove box door remain and apply gently pressures against the inside of the door to remove the glove box door stay. Swing door glove box down.
3. (Some 2004 models) press center hole (2) push pins located on the left and right sides of the glove compartment cover to lock them up and drag them off. When the pins are out, slowly remove the glove box compartment cover from the right side. There are close to (10) clamp pins that will come out one by one. Disconnect (2) electrical connections from the glove compartment cover and remove the cover.
4. Remove filter housing cover and slide filter out of homes.
5. Installation is in the reverse order of removal.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.