Saturday, September 3, 2011
2009 Honda CBR600RR frame slider Installation Manual
1. some pictures in this section is used to illustrate examples only. It is up to you how you decide to cut your bodywork motorbikes frame slider to accept there are many different ways customers go through this process. Shogun is not liable for any part of your motorcycle action. Just measuring the location of the cut and if in doubt at any time please call us before the install process is started. Professional installation is recommended. Always use proper safety measures during the installation of this product. Do not try to install this product without the proper tools, recently calibrated torque wrench, proper torque specifications from the factory service manual, safety goggles and gloves. 2. Localization and the bisection of the bodywork. This is a simple illustration of how most of us install the product here. It takes a little longer, but our results have been more consistent with a better overall fit and finish. We start with (99-SPOT 1212560) Shogun site tool. It is not something special just a 12 mm socket cap bolt with a 1,25 pitch that we cut his head off and sharpen to a point. You can purchase the tool for $ 12.99 or go to your local hardware store and make your own. Remember metric 10 or 12 mm x 1.25 pitch bolts (most common sportbike engine trim) are relatively hard to find. Make sure you know the size and the bolt you buy is a 1.25 pitch bolt. With the body is removed, thread by hand your spot color tool. Make sure you have the tool spot colors screwed in enough to clear the body on the inside.
Download Complete the frame slider 2009 Honda CBR600RR Installation Manual.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.