Saturday, September 3, 2011
2000-2004 Ducati Monster relocation bracket Installation Manual
Assembly: Assembly parts, as shown below with the main fittings in the bottom turn signal and then bracket, and then the tail light left parenthesis. Screw them together with the specified button head allen screws and nylon insert lock nuts. Insert screws through the bottom and attach nuts on top of the Stillingsgruppe to maintain a clean appearance from the bottom of a left parenthesis. If you have not done already, remove, and then unplug turn signals tail lights, and number plate light. Leave the wires hanging. Attach the bracket to the frame by using the included allen head cap bolts and washers. Place a windscreen washer on the bolt, then put up the bolt through the horizontal slots on a left bracket and screw them in the welded threaded inserts in the frame. Improve the appearance you can drill a hole through plastic skirt and put bolt through skirt, then through the Stillingsgruppe, then screwed into the frame. When an opening parenthesis has been mapped, drag pipes up through one of the two medium-medium-sized holes in the main bracket (the holes appear right where the square brackets buoys) and above the tail light mount. If necessary, cut a notch from the plastic skirt so the wires can be reset condition without binding or become kinked.
Download Complete 2000-2004 Ducati Monster relocation bracket Installation Manual.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.