Online repair manual

c.i.d. 215 Years Buick V-8 performer Rover catalog

• Egr system: this variety will take stock of equipment EGR (exhaust gas recirculation). On some 1972, and later model cars and only in some States, EGR systems are used. Check your local laws for requirements. Not legal in California on motor vehicles under the control of pollution.
• Diversity: this diversity will not take any rest carburettor system. We recommend the use of carburettors, listed in the recommendations of the carburettor.
• The elements of the installation & Accessories: key recommendations are listed below. However, for various years, makes and models included, see each part listed in the section installation items to Edelbrock catalog resolve more elements required for your particular vehicle not mentioned in these instructions.
• Power package: while changing the carburetor manifold Edelbrock performer will ensure GAINS great power over the rest of the equipment when you install yourself, we recommend the use of headers, hydraulic camshaft duration approximately 270 degrees tised and changing data in advance ignition curve for optimum results. Recommendations: be careful-GASOLINE use only carburettors recommended. If the prerequisites for installation are not available locally, contact Edelbrock.
• BRACKETS
1. in connection with the initial configuration of the carburettor at the Rover 3.5 litre engines of the throttle and bracket kick-down link to most vehicle models will require modification to fit. If this condition occurs with your installation, you can purchase Edelbrock mounting bracket # 8036 which accept cable throttle, kick-down and cruise control GM-style.
2. early and late model applications use different waterneck chassis. Artist Rover is designed to only accept early waterneck style with an integral water bypass outlets, which you can get from your dealer Rover. Note: If this output is not available in your area, withdrawal from 1967-1974 Buick V-8 is very similar. Part of the bypass is 5/8 hose rather than 3/4 and outlet angle 1-1/2 hose is slightly different.
• GASKETS AND SEALANTS
Warning: do not use high performance or competition like sending pads for street applications. At the expense of material deterioration in street traffic can occur inside the vacuum leak and oil.
1. use only the rest or equivalent material (GSM-Pro # MS96002) when you install the Edelbrock headers for street applications.
2. the use of hermetic Gasgacinch, Edelbrock # 9300, both sides of the reservoir, as well as Chief of the surfaces. This procedure ensures a good seal.

Source

Posted by manuels at 6:59 PM

Labels: Buick