Online repair manual

2008 Honda CBR1000RR clutch Inner Service Manual

While completing this procedure, be careful not to damage the covers, cowls or other components. 1. remove the intake air support (page 3-8). 2. remove the upper inner cover. 3. remove the lower cowl. 4. remove the right cowl Center. 5. remove the right crankcase cover (page 10-5). Clutch removal. 6. Remove the starter idle gear and shaft. 7. remove the snap ring and stopper ring. 8. Remove the coupling lifts piece and plate. 9. Unstake clutch center lock nut. Be careful not to damage the main shaft threads. 10. Keep the plate pressure with special tool. You must use the special tool (clutch holder, T/N 070 MB-MFLA100) when removing the lock nut. Using an impact wrench will damage the main shaft threads. 11. Remove the clutch center lock nut and washer and discard the lock nut. 12. Remove the clutch spring holder, spring seat clutch Springsand two. 12. Remove the clutch spring holder, spring seat and two clutch springs. 13. remove the spring seat.
Download Complete 2008 Honda CBR1000RR clutch Inner Service Manual.

Posted by manuels at 11:26 PM

Labels: Honda