Saturday, September 3, 2011
2008 Honda CBR1000RR frame slider Installation Manual
1. some pictures in this section is used to illustrate examples only. It is up to you how you decide to cut your bodywork motorbikes frame slider to accept there are many different ways customers go through this process. Shogun is not liable for any part of your motorcycle action. Just measuring the location of the cut and if in doubt at any time please call us before the install process is started. Professional installation is recommended. Always use proper safety measures during the installation of this product. Do not try to install this product without the proper tools, recently calibrated torque wrench, proper torque specifications from the factory service manual, safety goggles and gloves. 2. Body Prep. Use masking tape completely mask from the area of the body where you want to work. We will normally tapes from about 6 to 8 inches around the hole area, however, and any other edges that could have rumlede or scratched while you work. Tip: in some locations you can double up the thickness of masking take to give extra protection. 3. Localization and the bisection of the bodywork. This is a simple illustration of how most of us install the product here. It takes a little longer, but our results have been more consistent with a better overall fit and finish.
Download Complete the frame slider 2008 Honda CBR1000RR Installation Manual.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.