Saturday, September 3, 2011
Ducati Monster fuel tanks Installation Manual
Installation instructions: • use the stock rear hinge mount. Hinge bushings must have their faces being thinned by. 05.35 each for the tank to fit on the bike. DO NOT BEND aluminium bracket wider! • You can adjust the CAP lock tension, use silver button head cap screw on the bottom of the common agricultural policy. Tighten the screw to tighten the latching, Loosening will loosen the stores. Common agricultural policy functions such as vent. • Water drained is not used. • Use hose barb provided fuel pickup, threaded connection is no longer necessary. Fuel was picked in the same site on from delivery barb on the inside. • Be sure the idea is not being rubbed by something on the outside, to puncture from abrasion can occur in a short time. • Once the tank is in place, Locate frame rubber and bond them tank using a thin layer of silicone sealer after the tank is painted. • WARNING; Composites are not "malleable" like metal when weight loss is the main goal of FuelCel design, rupture of the fuel tank may occur instead of weakens. • This tank are sold without warranty either expressed or implied by the manufacturer and its final suitability is determined by the operator, motorcycle, where it is installed.
Download
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.