Tuesday, January 31, 2012
1999 Saab 9-5 SE Switch Panel Replacement
1 2 3 4 5 6 Ignition switch in the OFF position. Remove the upper and lower steering column covers, 3 screws. Remove the switches for the direction indicators and windscreen wipers. Remove the SID unit and any radio components. Unplug the connectors concerned and the aerial. Remove the heating and ventilation panel and unplug the connector. Remove the cover on the side of the dashboard. Remove the light control panel and connector concerned. 7 Remove the switch for the hazard flashers and connector. Remove other switches and their connectors. Remove the switch panel, 6 screws, fastened with 4 clips. Lift out the switch panel. 8 9 To fit 1999 Saab 9-5 SE Sedan V6-3.0L Turbo (B308) 1 2 Put the switch panel back in place. From the driver’s side, check that the air ducts are correctly positioned. Note: Check that no contacts or wires have been trapped. 3 4 Fit the switch panel, fasten with 4 clips and 6 screws. Refit the switch for the hazard flashers and reconnect the connector. Connect and fit other switches. Note: There is a mark showing which side of the hazard flasher unit should be at the top. download
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.