Monday, November 21, 2011
2006 Volvo S80 bi-xenon replacement lamp
Precautions always cut the current headlamps before replacing the lamp. Do not touch the core high-and low-light when working with high voltage and the risk of explosion. Delete the keys and lock the car. Allow the lamp to cool. When you replace the lamp with goggles and gloves. The glass bulb is Graz is filled with various gas and metal vapors which are under pressure. Do not touch the glass lamp. Only touch the lamp at the nest. Remove any finger of glass with a cloth and alcohol. The lamp must be used only in closed. Has been replaced with light-Xenon must be treated as hazardous waste and must be sent for recycling. Removal of ballast on the right side delete the filler of windshield-washer for better access, remove the screw, washer fluid tank filler to windshield Pull the pipe from the tank and remove the hose, place the paper in the hole Slacken off the six screws. Use 20 Torx with hole. Fold out cable ballast. Disconnect-xenon lamps.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.