Monday, November 21, 2011
1998 Volvo S70 Trunk/Liftgate locking cylinders
Replace the Trunk lid lock, switch or motor (4-door) ZZB1. Removing the trunk lid lock units (4-door), remove the lock body, see below CA5. ZZB2. Install the trunk lid lock units (4-door) installation lock unit by the inverse procedure CA5. Lock the unit ZZB3. Remove Lock switch units (4-door): delete the blocking unit. cable with the socket on the back. Go up. Connector and pull on the cables. Note the position of the cable into the switch. PIN switch. Switch of the cable. ZZB4. Installing switch unit lock installations (4-door): switch and cable through the hole. Note the position of the switch. Route the cable to the connector. Pins in the connector switch Assembly. cable to the socket on the back. cover. Lock unit. .. ZZB5. Remove Lock unit motor (4-door)
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.