Monday, November 21, 2011
2003 Volvo XC90 pad assemblies: service and repair-replacement pad
Note: Figures in the information services are used for various years and/or models. Some changes may occur. However, the most important information in illustrations is always correct. Preparations to remove the wheels on both sides. Remove the line pad assemblies Note: the recommended minimum pad thickness/Exchange limit during the installation of a new line of pad assemblies = 3,0 mm. Remove foundations springs and locating pins to the terminals of the brakes. Delete: is-is securing spring (3) carefully so as not to deform the protective caps (1) the two locating Pins (2 dowels, use hex Socket 7 mm. Remove: brake caliper from the pad assemblies. Hang a Vernier caliper brake in the wire between the rear spring brake hose damage. Note: do not reduce the brake pedal during pad assemblies are removed. Cleaning of Vernier caliper brake
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.